Quote Originally Posted by killinformula View Post
well the corner of the hood insert is poping up, just the very corner, it looks like it had a 3m tape or something under... i guess its warpped? but it easily can be pushed down to the hood again so woulda 3m tape work or what would you all suggest using?
Chances are, the adhesive holding the stud to the bottom of the insert has let loose, removal of the insert & a bit of JB Weld should fix you right up, just don't over tighten during re-assembly.

Or, as stated earlier, you could be one nut short of complete insert restraint...

Check my gallery for a solution most wouldn't touch with a ten foot whatchamacallit...