Pictures of WELDED to frame Rock Rails please...!!!

[Triathlete]

Look good Jo. But...it's going to be a beeeeeatch to sand the surface rust and paint them. Doesn't look like a lot of room to work on the tops (might just be the camera angle). I would just use flat rustoleum...they are going to get scratched...easy and cheap to repaint.

[Ldub]

Mmmmmmmm...BEEFY.............

[pbkid]

looks great jo. They look identical to the ones i built on the Runner, except with some 'prettier' welds

I am running into the issue now that they have been on there for about a year and i am getting some rust on he upper side thats right near the body of the car, now i cant remove them to touch them up. Im going to have to come up with a way to get them off.....OR, even better yet, a 3" body lift would help me access them

[Ldub]

Look good Jo. But...it's going to be a beeeeeatch to sand the surface rust and paint them. Doesn't look like a lot of room to work on the tops (might just be the camera angle). I would just use flat rustoleum...they are going to get scratched...easy and cheap to repaint.

looks great jo. They look identical to the ones i built on the Runner, except with some 'prettier' welds

I am running into the issue now that they have been on there for about a year and i am getting some rust on he upper side thats right near the body of the car, now i cant remove them to touch them up. Im going to have to come up with a way to get them off.....OR, even better yet, a 3" body lift would help me access them

Mmmmmm...i dunno, I think you guys are over think'n it...

All ya need to do is...

Reach on up there with some sand paper or a sanding block/sponge dealio, brush on some rust converter or primer, brush on some bed liner or undercoating/rust bullet...DONE!

It don't have ta look purdy, we're not tAk'n it to the fair...

[JoFotoz]

Yup...........

All ya need to do is...

Reach on up there with some sand paper or a sanding block/sponge dealio, brush on some rust converter or primer, brush on some bed liner or undercoating/rust bullet...DONE!

It don't have ta look purdy, we're not tAk'n it to the fair...

...paint stick wrapped in sandpaper gets "up & in there", and a sanding sponge works well as Dub says.

And hey, if I make 'em look prettier than me, they'll still be UGLY!



jo

[Triathlete]

we're not tAk'n it to the fair...

Ya never know!

[pbkid]

dubski, if you can efficiently sand mine, i would be a very very impressed guy. they are just about touching the body...

Plus, if not, this gives me a reason for the 3" body lift and 35's to make sure that i can get in there to paint them

[Kenny]

sand? paint? rust?
huh?
those words are alien to me.
I'll shut up now and go sit in my corner.
(with my stainless steel)


Nice work Jo, they look awesome.

[Ldub]

dubski, if you can efficiently sand mine, i would be a very very impressed guy. they are just about touching the body...

Plus, if not, this gives me a reason for the 3" body lift and 35's to make sure that i can get in there to paint them

Awwwww...DUDE...

Now I hav'ta bring a cut sanding belt AND crocus cloth with me...

OK, I'm there for ya...