Last edited by Ldub : 09/27/2011 at 09:09 PM
BTW, Tom, as a point of info.
I was able to attach the cross member drops & cross member with 1/2" gr 8's.
They fit perfectly through the holes in the frame, though due to hole alignment issues, I only got 1 of 2 into the frame connection, with the 2nd hole utilizing one of the old stock bolts.
As always...overkill is the best kill...![]()
Last edited by Ldub : 10/05/2011 at 08:46 AM
Dub, stupid question, is there a way that you know of to identify a set of 4.77s just by looking at the 3rd member? Like counting teeth, etc? I may have stumbled onto a set that are cheap enough that I might just have to buy them for prosperity's sake (or maybe I'll install them in my Trooper with an ARB Air Locker).
Bart
Unicorn tears....and here I thought they were just hen's teeth!! I have a lead....that's all, so when they arrive at my doorstep, then I will do the. I possibly found them while working on this project:
http://forum.planetisuzoo.com/viewto...terior#p476590
BTW, thanks for the info on the gears.
Bart
Last edited by nfpgasmask : 10/05/2011 at 08:53 AM