Code PO304

[Mile High VX]

Thanks
I got new plugs and I am going to swap the coils on cylinders 2 and 4 to see if anything changes while changing the plugs.
Hopefully will not take to long its cold out
Steve

If you've never changed the plugs on the VX before the wells are deep!

I found it helpful to use a piece of vaccum hose about 12" long to get the plugs started. Just put it on the end and lower the plug into the well and twist to get the plug started. Keeps you from dropping them into the well and upsetting the gap. Of course if you have a magnetic plug socket that works great too...