Any advise on glue for window fix + ball joint flip help

[Ldub]

CR,

After 11-12 years, those plastic tabs are gonna be brittle. I would highly recommend using SBC's upgrade. I have a spare one at home. Want me to check on shipping cost?

As far as adhesive: if you are reapplying the plastic tabs, I'd use PC-7 (I can't buy it local anymore so I need to see if it can be ordered on line ... if you are installing the SBC brackets, I'd use black RTV since it's strong, adheres to glass & metal but can be reworked if necessary.

Tom

I can get PC-7 locally in any flavour you desire, (they have different formulas for hi-temp, steel, wood, etc) let me know if I can be of assistance...

[tom4bren]

I can get PC-7 locally in any flavour you desire, (they have different formulas for hi-temp, steel, wood, etc) let me know if I can be of assistance...

Thanks. I'll let you know. I also need to pick up some PC-11 to install the depth finder on my boat.

[Ldub]

Thanks. I'll let you know. I also need to pick up some PC-11 to install the depth finder on my boat.

I'll check what they have at my local fav hardware when I'm out & about later, & post a complete list of what they stock.

The last time I was in there, I noticed they had an amazing selection of the "PC" line, along with a huge variety of other epoxies...

[Ldub]

Thanks. I'll let you know. I also need to pick up some PC-11 to install the depth finder on my boat.

I'll check what they have at my local fav hardware when I'm out & about later, & post a complete list of what they stock.

The last time I was in there, I noticed they had an amazing selection of the "PC" line, along with a huge variety of other epoxies...

As promised...

PC Farenheit.(up to 500 deg)...1 oz. $5.00
PC Lumber.(for wood.....duh)...1 oz. $6.00
PC 11.............(Marine)..........2 oz. $6.00
PC 7........(Multi use-general)..2 oz. $6.00
PC Plumbing.....(guess)..........2 oz. $6.00
PC Metal.........(again)...........2 oz. $6.00
PC Crete.......(for concrete)....2 oz. $6.00