ya, they say that its a 'cold weld' frame...which i guess just means you have to use a certain type of welder...i might bolt them on anyhow and have the diff gaurd welded...should only take 30 mins. to do the diff gaurd
Super VXer
ya, they say that its a 'cold weld' frame...which i guess just means you have to use a certain type of welder...i might bolt them on anyhow and have the diff gaurd welded...should only take 30 mins. to do the diff gaurd
"Do Not Seek Praise. Seek Criticism."
"If You Can't Solve A Problem, It's Because You're Playing By The Rules."
"The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."
-Paul Arden
Super VXer
To add to what Kenny said...
6" C-clamps can also be very useful in holding things together while mounting...
Super VXer
im hoping that between my jack, and 2 jack stands i should have enough to hold it up there..
Super VXer
Do not weld to the frame! ever. Your sliders need to be bolted. You can crawl under mine in Moab if you want but if you weld to the frame it will crack at some point. Frames are made to flex and are heat treated. Once you disturb this heat treatment and flex the frame it will start to develop cracks near the weld. Now on the other hand if you look at our jeep where the cage is welded to the frame the entire structure is now rigid so there is no flexing.Originally Posted by pbkid
Todd
Last edited by Todd Adams : 05/07/2009 at 06:08 AM
Super VXer
todd-
good to know! thanks for the heads up...i will be bolting them in in that case...
im alright to weld the diff gaurd on right??? i dont see how else you would connect it?
Super VXer
can't say since i don't know where it goes.
Super VXer
Rocky Road welded the prototype on mine 2.5 years ago and I saw no issues develop. Something you may want to research though is the possible need to remove the diff fluid before welding...
Sent from my "two hands on a keyboard"
Super VXer
I assume this is the rear differential. I have never seen a weld on shield. I can’t believe Glen would not build this as a bolt on.
Super VXer
Yeah, it's for the rear - at least mine is. He asked me if I would be interested in having one made and installed (welded) for free and I said "SURE!" The install looks great too! I think maybe fabbing bolt in place bracketry would overcomplicate things and render it over-priced.
Super VXer
ya, i had it welded on today...the rear axle is welded anyhow so the welder said it wouldnt loose strength with the extra weld....
now im freaking out... i have NO access to a corded drill, only my cordless that is definately not strong enough to drill through our frame...
gonna have to get creative
Posting Permissions
Reply With Quote