Had my front bearings repacked today

[grantCO]

I bought my bearings for like $10-15 each, you only need two.. 200 is way too much, did you mistype?

200.00 is way cheap price out the 4 bearings you need and the two seals. The seals are around 12-15.00 but GOOD bearings are going to cost you. Don't skimp on wheel bearings.

[driver3]

200.00 is way cheap price out the 4 bearings you need and the two seals. The seals are around 12-15.00 but GOOD bearings are going to cost you. Don't skimp on wheel bearings.

According to this repack, there are 2

http://www.planetisuzoo.com/articles...Bearing_Repack

This is the one I've been doing. I found the outer front bearing on autozone for 70 ea.

[grantCO]

According to this repack, there are 2

http://www.planetisuzoo.com/articles...Bearing_Repack

This is the one I've been doing. I found the outer front bearing on autozone for 70 ea.

There are two per side. A inner and outer. If you are only doing the outside one you are missing the inner bearings. trust me you wont find a complete bearing set for the VX for under 200.00 with 4 bearings and axle seals

[JHarris1385]

If you were not able to order ones exclusively for the VX what kind of size or other parameter would you look for. I only ask because I have connections to a bearing manufacturer and do not know what to exactly ask/look for.

[grantCO]

If you were not able to order ones exclusively for the VX what kind of size or other parameter would you look for. I only ask because I have connections to a bearing manufacturer and do not know what to exactly ask/look for.

Ask for a trooper with the tod system. Or Isuzu 10 bolt ifs and 12 bolt rear.

[JHarris1385]

So would just saying a I need a bearing that fits a 10 bolt ifs and 12 rear work?