Help! I've been riced

[nfpgasmask]

Bart, 220 and 230 are essentially the same, depending on a variety of minute BS. What I meant was that the outlets in your house are typically not the kind used with a welder. You may need to put in a new outlet.

Come by the new crib on Saturday, I'll be there all day. You can take a look at what I have to work with.

I could sandblast your jerry cans at my dads, 'cuz the blaster isnt all that portable.

Cool, thanks. They are just caked with layers of OD Army paint and I want to strip that crap off and then respray em.

I need to look at what you are doing for the lights again. I could mill some bar stock to get the angle, or we can use sheetmetal in the bending brake. Doing brake lines isn't hard, but properly bleeding the system sux. Lemme know.

Wait a tic, you have a bender? All I really need to do is cut off the posts and then re-weld them on at the correct angle. But if you have a bender, I could just grind a notch on them, bend all four to the right angle and then touch up the weld a little. That would be way easier.

Bart

PS - Was it you LDub who said I will never be done modding?