Well, my garage has become cold, work is all jacked up, and I can't focus on much... so... not a lot of progress, but there is some...

Since the steering column was removed we were able to remove some fasteners and rotate the dash downward. This allowed us to get to the wires from above and remove them from the firewall.


Removed!



Spaghetti and meatballs! I removed the old wiring to replace it with the Sierra wiring.



The instrument cluster fits just as tight as everything else but it fits after a bit of trimming


The HVAC controls fit perfectly in the radio slot! (After a bit of trimming)


I started hacking up the shroud to get some idea of how I'm going to tie it all together. FUN FUN FUN!


My biggest concern with the interior wiring so far is the removal of the vacuum actuated HVAC parts for the electric servo driven ones. We'll see...