I sprayed carb cleaner all around the intake/throttle body , no increase in idle.
High Idle returned to day . When the motor started the high idle I popped open the hood, and grabbed the shaft that the accelerator cable is attached to . I was going to increase the throttle , but the weight of my hand on the shaft caused the idle to return to normal. There was no discernible downward movement of the shaft. I increased the throttle and it returned to high idle, and then I pushed down on the shaft and Idle went back to normal. I cant detect any downward movement of the shaft .
What is going on ? How do I fix it ?
I still get pulsating idle when in gear . When I engage a gear the Idle will drop to about 500 rpm and then return to 750 most of the time . Other times it will just bounce from 500 to 1000 rpm ,over and over and over.
During a high idle episode , I pulled the plug on the TPS while the engine was running,and the idle immediately returned to normal.
Could the TPS be the culprit?