turn signal relay ??

[orion]

found it!! man that thing is buried. from the fuse block go forward about 6in then up about level with the air vent. you can just get your arm past the 3 wire harness. its all by its self above a somewhat large connection.

thanks ZEUS for the help

[Marlin]

found it!! man that thing is buried. from the fuse block go forward about 6in then up about level with the air vent. you can just get your arm past the 3 wire harness. its all by its self above a somewhat large connection.

thanks ZEUS for the help

Don't forget to refill the blinker fluid!!!

[Grif]

Don't forget to refill the blinker fluid!!!

Pref Mobile1 synthetic!

[WormGod]

Just curious what your business is with the blinker relay. I have been meaning to swap out the relay to remedy my fastblinkercomplexsinceIhaveLEDsnow. Recently did a LED swap in my STi and it came with a quick swap relay which did the trick amazingly well, but I need to see the relay the VX blinker uses to see if there is a direct replace or if I need to do some splice work.

[orion]

i replaced relay with a direct fit LED relay form http://superlumination.com/equalizers.htm it works with any combination of LED and standard bulbs. it works great.
this our relay

the prongs are marked E B L.

[WormGod]

Is that an EP34 (type CF13) you posted as the direct fit? I REALLY am interested in finally resolving my zippy flashers, heh.

And you say it's a direct fit eh? Your post just might be the nudge I needed to get this done.... after 6 years of waffling on it.

[orion]

Thats the one, it is a little bit bigger than stock, but it fit with no problems.