Results 1 to 15 of 249

Thread: AutoPros V8 Build - Photo Thread

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Sep 2003
    Location
    1999, Black, VX1, 0813
    Posts
    71
    Thanked: 1
    Total cost? Is the customer a member here? How's this holding up a year and a half later?

  2. #2
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    Since the VX was shipped to Africa, I doubt that the new owner is a member. I also doubt that the conversion shop gets many updates IRT the health of their little work of art.

    If you have to ask how much the conversion cost ... you wouldn't be able to afford it anyway
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  3. #3
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    Quote Originally Posted by tom4bren View Post
    Since the VX was shipped to Africa, I doubt that the new owner is a member. I also doubt that the conversion shop gets many updates IRT the health of their little work of art.

    If you have to ask how much the conversion cost ... you wouldn't be able to afford it anyway
    As much as the vehicle was brand new.
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  4. #4
    Member Since
    Jun 2002
    Location
    Former owner of '01 Ebony #0739
    Posts
    1,579
    Thanked: 5

    All I want is...

    To be "Overhauled" by Chip Foose, Independent4x, Rocky Road, StinkyFab, AutoPros, 4 Wheel Parts, etc.

    V8, MT (no matter if it saves TOD or not), get rid of 14 years of snow belt rust... Just keep my VX away from those nutjobs over at West Coast Customs! I don't need 2 50" flatscreens that swing out on articulating arms...
    The only thing we have to fear is fear itself... and zombies.


    My VehiCROSS

  5. #5
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, VX, 1379 (sold)
    Posts
    994
    Thanked: 0
    Quote Originally Posted by nocturnalVX View Post
    To be "Overhauled" by Chip Foose...
    Oh, don't get me started on Overhauled/Foose... I would rather BURN my VX to the ground than let Foose Foock it up! I cringe every time they unveil one of their projects. Foose tends to remove some of the most distinctive details from his cars. He would probably remove the fangs, flatten the doors, "tighten up" the lines on the cladding, trim the "horns" off the headlights, and scrap the TOD system. I nearly died when I saw that he had removed the Dagmars from the front bumper of the '57 Chevy they did for SEMA last year. It just looks naked!

    Gregg
    2001 Proton Yellow #1379

  6. #6
    Member Since
    Mar 2012
    Location
    sold
    Posts
    1,158
    Thanked: 0
    Quote Originally Posted by KILNA View Post
    Total cost? Is the customer a member here? How's this holding up a year and a half later?
    i asked them when it was all said and done how much - iirc it was about $35k not including the truck or shipping - said it was going to south africa

  7. #7

    Question Great Project...

    Quote Originally Posted by evillecutter View Post
    i asked them when it was all said and done how much - iirc it was about $35k ...
    Finally, the number we all were waiting for. As I digest the future of the VX, these sorts of conversions will save the survivors. I think a lot of VX owners know that, and a few are willing to admit it. For the mechanical equivalent of a "new" VX, the $35k pricetag is not at all alarming. Think about a generic new 2015 Jeep Rubicon at nearly the same number...Which would you rather have? I'll take the GM V8 VX...sooo cool!

    What would be an ideal donor VX for the sequel here?

  8. #8
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    Understand though, that $35K for conversion is NOT a restoration. No rotisserie and frame grind/paint on this bird. The key word here is "conversion". Me personally, I would consider a full resto if I were going this distance anyways. That honestly is a ton of money for a convert, so it is best to plan ahead what you want/expect.

    And give or take a few grand for this convert for things like stereo system, suspension, brakes, etc. that you may not necessarily need that were done in this situation.

Similar Threads

  1. Figured I should start a build thread
    By eternal21 in forum Build Projects
    Replies: 48
    Last Post: 05/25/2020, 04:34 PM
  2. RADO's Off Road Rig- Build Thread
    By VXorado in forum Build Projects
    Replies: 295
    Last Post: 11/18/2018, 01:27 PM
  3. Nuke VX build thread
    By sleveritt in forum Build Projects
    Replies: 92
    Last Post: 05/28/2014, 01:45 PM
  4. A photo thread for all y'all shutter bugz
    By Ldub in forum Ldub's After Midnight Topics
    Replies: 28
    Last Post: 11/29/2012, 05:44 PM
  5. VT_Maverick Build Thread
    By vt_maverick in forum VX Modifications...
    Replies: 7
    Last Post: 01/22/2012, 07:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails