So I bought a four calipers, new steel brake hoses, a master cylinder, a proportioning valve, new brake pads, and a couple of gallons of brake fluid for about $400. I also found a mechanic that would do the work for $400.

Well, he talked a good game then flaked on me. So I decided to do the work myself. It was pretty easy but took about 8 hours. The hardest and worst part was breaking loose all the bolts and clips. The brake line bolts are soft so a couple were nightmares. Especially the brake hose by the fuel tank...

I haven't worked on a car since high school so I'm proud that I got all the parts replaced, that I didn't kill myself, and that the brake system works.

I'm still frustrated because the ABS light is still on....