Quote Originally Posted by tom4bren View Post
Let me explain myself one more time so that you don't have to search through hundreds of posts looking for the perfect quote.

I still feel that a crossover tube would be a means of removing one variable from the problem we experience with oil consumption. I don't feel that it is the source of all of the issue but it's easy enough to install one to find out ... except that I didn't think it through in regard to drilling the hole in the valve cover without introducing metal shavings into the crank case. That's the reason that I went with the vent filter temporarily. It's just not worth removing the valve cover at this point in time (I will however drill a hole in Boy's valve cover since it's already off). This is absolutely a Research & Development (R&D) scenario so changes to the concept are not only acceptable, they are expected.
When I've already provided you with your answer(s), there is no need for me to explain myself once again.

At this point, the only thing that remains a mystery is whether you're just trolling me to try to get me to waste more time answering the same questions...or whether you REALLY haven't understood the answers you've already been provided with.

Either way, I simply don't care about your project any more. Good luck.