So shorts in the doors?
The ones I am missing are not seen till you open the back door.
Post a pic. IIRC there are no Torx inside the rear door. If you're talking about the ones at the top of the rear bumper cover inside the door, then they aren't Torx & they aren't even the same thread. I think I have some extra of those.
Edit:
Open the second file in this post. Are you talking about the bolts located where mav is pointing to in the top pic on page 4?
http://www.vehicross.info/forums/sho...1&postcount=13
EDIT again:
Merlin indicates that my 16 remaining cladding screws should be in very soon. He also said that someone else ordered some in Feb & they should be in soon too.
Last edited by tom4bren : 03/13/2013 at 12:27 PM
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
I've mentioned before that everyone has 4 'spare' torx screws for the cladding. Here's a pic of where they are located at. You just need to replace them with a comparable hex head screw. They are hidden by the side cladding so nobody will ever know that you purloined them for alternative purposes.