cleaning egr

[evillecutter]

I've done it at least five times. I believe twice for a slow flow code, and other times just to keep the small tube clean. It's super easy. My gasket was always sealed to the valve, and I never replaced it yet. Others got a new gasket at NAPA for like $3, so have one on hand. A uni-joint will help with the bolts.

The process is the first question here-
http://www.isuzufaq.com/

If you have no trouble code to start with, you should have after running the engine with the valve off. Just clear it with a code reader.

I tried the breather thing for a short while years ago. I plugged the tube to the intake with a bolt and had a breather filter thing on the hole. It didn't reduce oil use for me at all, so I went back to the stock PCV valve.

It should not pass inspection with a breather like that, but it would be easy to change back just to pass.

Mark

not throwing a code now and do not want to anytime soon if at all possible so i think i will probably just stick to using the stock pcv -i cleaned it out with carb cleaner it seems to be working just fine and looks in good shape - plus i dont use that much oil so its not that big of a deal yet - hey i dont have a code reader so do you have a suggestion of what type/brand/model might be decent/affordable and somewhat user friendly? - and fyi - in indiana we dont have inspections we just blow all out dirty air down to kentucky

[deermagnet]

hey i dont have a code reader so do you have a suggestion of what type/brand/model might be decent/affordable and somewhat user friendly?

You can get one at Walmart for ~$70. Just make sure it says it'll clear/erase the code. There are some real cheap ones that just read the code.

Here's one for only $52. It has some software which some website wants you to pay to get more specific info on codes and fixes, but that stuff is free all over the internets. Some of the customer reviews say it shuts off the light with a push of a button.

http://www.walmart.com/ip/Equus-3030-Innova-Diagnostic-Code-Reader-for-OBDII-Vehicles/13029622

Then you'll be able to read the codes and erase 'em and turn off the check engine light in seconds. Even while you're driving without ever lifting the gas pedal.

Mark

[Ldub]

You can get one at Walmart for ~$70. Just make sure it says it'll clear/erase the code. There are some real cheap ones that just read the code.

Then you'll be able to read the codes and erase 'em and turn of the check engine light in seconds. Even while you're driving without ever lifting the gas pedal.

Mark

X-2...

I like my Aero Force scan gauge thingy...

More expen$ive, but will do all that a code reader will, + display in real time, any 2 parameters of my choosing.