Replace Map Lights - how?

[Ldub]

Whatever you use to get in there with, when you get the lens off, the bulbs are pretty hard to get to. If you "stick" something in there to pry the bulb out, be carefule as you can short out that circuit pretty easy, use something plastic or wood.

May I recommend pulling the fuse first?...

[RickOKC]

May I recommend pulling the fuse first?...

Now you just sound like the Shop Manual:

"Replacing wiper blades: Step 1, Disconnect the battery..."
"Installing replacement gasoline: Step 1, Disconnect the battery..."
"Vacuuming carpet: Step 1, Disconnect the battery..."



Kidding, of course - I'm glad this topic came up since I also have a map light out. Thanks for all the tips and advice everyone!

[JAMAS]

Now you just sound like the Shop Manual:

"Replacing wiper blades: Step 1, Disconnect the battery..."
"Installing replacement gasoline: Step 1, Disconnect the battery..."
"Vacuuming carpet: Step 1, Disconnect the battery..."



Kidding, of course - I'm glad this topic came up since I also have a map light out. Thanks for all the tips and advice everyone!

That is actually what the shop manual suggests before changing the map light. Sounded a bit much for the task.