Another ABS light

[Riff Raff]

Here's an even cheaper (< 0.01 cent) and quicker option without any labor involved to having the ABS light disappear. Simply put a tiny piece of Black Electrical Tape over the ABS indicator light on the instrument panel. Problem solved.

[Mile High VX]

Here's an even cheaper (< 0.01 cent) and quicker option without any labor involved to having the ABS light disappear. Simply put a tiny piece of Black Electrical Tape over the ABS indicator light on the instrument panel. Problem solved.

That's how I got rid of the flashing clock on my first VCR...

[tom4bren]

VX is due for inspection & was sure it wouldn't pass with the ABS lite on.

Tried bending pin over & removing fuse. Lite still on. Pulled the dash cluster out & removed the ABS bulb. Only takes about 30 minutes & the only tool you need is a phillips screw driver.

If I get a chance this weekend, I'll try a re-do whilst taking pix.

BTW, there is only 1 fuse for ABS. The 20A one indicated on the cover is the one. The 40A shown on the cover is a fusable link, leave that in place.

BBTW, inspector dude doesn't like black 'lectric tape over idiot lights - couldn't go that route.

[nfpgasmask]

AFAIK, the ABS light does not trigger a CEL in the ECU, so you should pass emissions/etc. I have passed here in Reno 3 times with my ABS light on. Recently, I ripped out all of my ABS junk from the hubs and pulled the fuse. I just need to get that light out as well.

Bart

[Riff Raff]

VX is due for inspection & was sure it wouldn't pass with the ABS lite on.

BTW, inspector dude doesn't like black 'lectric tape over idiot lights - couldn't go that route.

Tom--- It's a good thing the Inspector Dude doesn't know about the pre-ignition ACC switch test light function for the ABS Light Bulb.

[tom4bren]

Nah, but he sure focused in on the front right wheel bearings. FAILED.

Guess I'm getting dirty tonight to replace bearings (Kenny's write-up will be my friend - gotta remember to print it out before I go home).

[nfpgasmask]

Naaaa, replacing/repacking the wheel bearings is messy, but its an easy job if you have the right tools. I just did mine and it was simple.

http://www.vehicross.info/forums/sho...ght=front+axle

Bart