Line X on cladding

[Marlin]

I thought I would chime in with a few comments regarding the use of LINE-X on the cladding. I'm the LINE-X dealer working with KRemo.

We have a substrate manual that states that LINE-X is not recommended for polypropylene and polyethylene. I suppose our chemists have determined through pull-off tests that LINE-X does not obtain reasonable adhesion to these substrates.

That being said, I understand that there are a few successful applications of LINE-X to the cladding. So, we are going to give it a try.

There is a private LINE-X dealer online forum and I have asked if anyone has any experience with the Vehicross.

Having said that, does that negate any warranty associated with the application? Also ask around if others have done any Chevy avalanche applications. Pretty much same stuff.