Quote Originally Posted by RamAirZ View Post
If it's a 98+ with the 3.2 all the engine stuff should swap over for the most part, the transmission itself should work if it's an auto 4x4 trans, the wheels/tires will work, and a few misc. interior pieces (like fog light switches, different dash switches etc), if it's a 95.5-97 the whole dash is the same (aside from the gauge cluster itself but the lense would swap over) and they have a switch panel where our fuzzy cubby hole is. Also on the 98+ for suspension parts, the upper ball joints should interchange (I think they are the 3 hole ones). Not positive on much else as far as suspension on it. I know the steering is rack-n-pinion on the 98+ so nothing from it would work on ours.
Nice to know, I believe any of the wide stance ZUs upper ball joints would fit? Not sure why you would get used ball joints, since new ones are like 40 bucks a pair on Ebay, but hey, just in case.
I wonder if you could fit the center console out of a rodeo into the VX? I am gonna have to measure that and see.