Quote Originally Posted by tom4bren View Post
The strength of the hitch is limited by the bumper that it bolts to (in our case), not in the welds.

While they have the rear cladding off, I'll look to see if the strength of the end product can be upgraded by modification (I'm thinking that there should be a way to extend the hitch bracket to actually engage the frame rails). I'll let you know.
your right there is a way to add a piece of 1/4" thick angle accross between the frame rails...thats how I built mine...

I made my own conceled hitch back in 2000

I used a way beefier design than what is pictured above, however I abuse mine...bigtime...

I have towed almost 15,000 lbs like 200 miles (zero tongue weight)
Yarded 17,000 Board feet of Huge logs with it and pulled out countless over-egoed 4WDers....
So mouch abuse in fact that my pin-hole in the receiver, now looks like an egg-shape...

Anyway, with a little more "beef" to the above design, it should be able to handle heaver loads and or winching....