I ended up putting on too thin of a coat the first time last June because I used a soaked rag, and since then, the front bumper has had some slight flaking off I believe from wind and abrasion.

So I hit it yesterday cuz it hit 68 degrees, the min. for working with this stuff. I used a foam brush which worked much better and it looks great. I actually applied it generously, then brushed and brushed to keep it from slowly dripping. After about 7-8 mins it gets thicker and it stops dripping and the brush strokes disappear for a nice even, satin finish. Doesn't really darken the cladding (unfortunately) or cover up any discolorations but it sure makes it look brand new otherwise.

This hard coating will last for years now I believe....and there's still at least 8 or 9 applications remaining in the can.