How do you remove the backseat

[JAMAS]

lol,

dude just hit the 'clip washer' on the bolt that holds the seat to the brackets (x2 bolts) and it flatens it and you litterally hammer the bolt out the other side. The bolt comes straight out. I just drilled my bolt and put a split pin in it ......15 mins...done

now i can remove the seat in 30 seconds

Clip washer?

Can you post a picture to better demonstrate?

Thanks!

[tom4bren]

"but that wasn't my overall goal"

I was just trying to get you to the campground this weekend. I figgered you'd be finishing the job later.

[JAMAS]

"but that wasn't my overall goal"

I was just trying to get you to the campground this weekend. I figgered you'd be finishing the job later.

I didnt mean it like that. I just meant to say that when I was working to remove it I was going in with the mindset of "whatever it takes to accomplish the job". Then I had to stop myself before I broke more bolts....regroup and remember what my overall goal was. So I pushed the seat forward for this weekend and figured I would have better luck after I talked to you guys.

I appreciate the advice.

[circmand]

Snapped a bolt as well ordered new ones from Merlin for all of them one is back ordered

[tom4bren]

"I didnt mean it like that."

No problem - didn't rub my fur the wrong way. Just in a hurry when I responded.

[JAMAS]

Snapped a bolt as well ordered new ones from Merlin for all of them one is back ordered

Did you order recently? When I spoke to Merlin, he didnt make it sound like any of the 4 bolts (2 fronts, 2 backs of the bracket) were on back order.

[JHarris1385]

Why are we worrying about brackets? Just take out the bolts from the front of the seat on both sides, lift from the back and then remove. It seriously takes 10 minutes the first time and less than a minute after that.

[JAMAS]

Why are we worrying about brackets? Just take out the bolts from the front of the seat on both sides, lift from the back and then remove. It seriously takes 10 minutes the first time and less than a minute after that.

Are you talking about the bolts that bolt down the bracket, or the pin that goes through them?

When I looked at the seats, I only saw 2 ways of removing them.

1. Remove the pin and separate the bracket.
2. Remove "4" bolts and remove the whole thing. Bracket and all.

What am I missing?

PS.JHarris1385 - Please check your PM

[circmand]

Did you order recently? When I spoke to Merlin, he didnt make it sound like any of the 4 bolts (2 fronts, 2 backs of the bracket) were on back order.

And I still do not have it

[JAMAS]

And I still do not have it

Unfortunately you were right. The bolts are on backorder (3-6 weeks).

The front facing (big) bolts are good, but one of the rear facing (small) bolts is broke. Are the small bolts just to ensure the seat doesnt fly forward when they are folded forward? In other words, should I be concerned that one of the small bolts is missing when I latch in a child seat?

[crotchrocket]

Clip washer?

Can you post a picture to better demonstrate?

Thanks!

erm.........that was kinda a made up name lol, the bolt is scored all the way round at the end and the 'cap' or 'clip washer' has a tonge which clips into it. Its VERY thin metal and the only way to get it off is just to hammer the bolt through it.


they dont even number it but its on the end of the bolts highlighted

[JAMAS]

erm.........that was kinda a made up name lol, the bolt is scored all the way round at the end and the 'cap' or 'clip washer' has a tonge which clips into it. Its VERY thin metal and the only way to get it off is just to hammer the bolt through it.


they dont even number it but its on the end of the bolts highlighted

Thanks for the picture. I bet that is what Merlin (that guy is awesome) was looking at when I described the bolt I broke and requested a new one ($0.89).

So I guess the best way to proceed is hammer the S*#t out of the bolt. I started mildly hitting it with the hammer but I got worried I would break something so I stopped.

Thanks!