View Poll Results: has your abs pump/module made your abs light come on?

Voters
153. You may not vote on this poll
  • yes

    110 71.90%
  • no

    43 28.10%
Results 1 to 15 of 99

Thread: question and poll regarding abs module

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Aug 2004
    Location
    01, Kaiser Silver, VX, 1102
    Posts
    269
    Thanked: 0
    So I have a used ABS Module and wanted to do the same thing, remove plastic side and not bleed brakes. How has this worked for you since you did swap.

  2. #2
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    bleeding the brakes is so easy though.. its a routine scheduled maintenance that should be done every 2 years anyway.. i could easily replace the abs module and bleed all the brakes in under an hour.. or if you dont want to do it yourself, having the brakes bled at a shop should only be like 35-40 bucks imho its worth it to do it or have it done

  3. #3
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Brake bleeding is super easy if you get brake bleeders (see Rickshaws gallery). They are easy to install and allow 1 person to do the job easily.

    Another way of activating the ABS is off roading. When going down loose rocky/sandy hills with your brakes on you will feel the ABS working!
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  4. #4
    Member Since
    Nov 2002
    Location
    2001 Dragon #0467
    Posts
    195
    Thanked: 0
    I replaced my ABS Module last month. It was very easy following etlsport's ABS Module Replacement (How To)
    Along with Speed Bleeders, took about an hour to do.



    Speed Bleeders
    SB7100 M7 x 1.0
    speedbleeder.com
    rickshaw
    Original Owner
    2001 Dragon #0467

  5. #5
    Member Since
    Jun 2002
    Location
    1999 silver 1346
    Posts
    505
    Thanked: 0

    Smile

    Quote Originally Posted by VXNIT View Post
    So I have a used ABS Module and wanted to do the same thing, remove plastic side and not bleed brakes. How has this worked for you since you did swap.
    been months now and no problems

  6. #6
    Member Since
    Jun 2008
    Location
    2001, Kaiser Silver, Vehicross, 1406
    Posts
    11
    Thanked: 0

    ABS Module

    What are you guys paying for the replacement module? And where are you getting them? Thanks in advance.

  7. #7
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    i paid 100 for mine.. found a parted vx and bought it from the owner.. it is also identical to the one found in either a trooper or rodeo with 4 wheel discs, just cant remember which year/model

  8. #8
    Member Since
    Aug 2004
    Location
    01, Kaiser Silver, VX, 1102
    Posts
    269
    Thanked: 0
    Anyone remember Torx size on ABS side plastic piece neede to just remove the half?

  9. #9
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1

    Exclamation ABS Module

    I Had Purchased A Used ABS Module For My 2001 VX Last Year For $80. I Worked Well For Over 1 Year But Eventually It Went Bad And The ABS Light Was Activated And The Scan Showed A Trouble Code Problem. I Did Some Research Online And Found A Rebuilt ABS Unit By Automotive Scientific In Rogersville Tennessee (423) 921-9085 With A LIFETIME WARRANTY For $229 I Received The Rebuilt ABS Unit But It Was Only The Black Plastic Brain Part. Installation Took 10 Minutes Because I Did Not Have To Bleed The Brakes. The Trouble Code Was Clear And Hopefully The End Of My ABS Issue ! This Was Sept 12Th. So Far So Good! It Is Worth To Spend A Little More For Peace Of Mind. To Install Another Used ABS Module For $100 Did Not Make Sense and Gamble How Long It Will Last !

  10. #10
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Quote Originally Posted by ALC1717 View Post
    I Had Purchased A Used ABS Module For My 2001 VX Last Year For $80. I Worked Well For Over 1 Year But Eventually It Went Bad And The ABS Light Was Activated And The Scan Showed A Trouble Code Problem. I Did Some Research Online And Found A Rebuilt ABS Unit By Automotive Scientific In Rogersville Tennessee (423) 921-9085 With A LIFETIME WARRANTY For $229 I Received The Rebuilt ABS Unit But It Was Only The Black Plastic Brain Part. Installation Took 10 Minutes Because I Did Not Have To Bleed The Brakes. The Trouble Code Was Clear And Hopefully The End Of My ABS Issue ! This Was Sept 12Th. So Far So Good! It Is Worth To Spend A Little More For Peace Of Mind. To Install Another Used ABS Module For $100 Did Not Make Sense and Gamble How Long It Will Last !
    HOLY MOLY Al! We've been talking about and using that company for a few years now, and buying it thru ebay is only $49 with lifetime warranty - - seriously, it's the same company and the same repair and warranty - for $49. I've sent two modules to him so far. And they paying shipping too.

    Start reading this thread at about post #44. We've had lots of discussions on the ABS failure, and found a great option - Repair exisiting module with lifetime warranty for $49!!
    http://www.vehicross.info/forums/sho...ight=dodge+abs

    Here's the current ebay listing: (Doesn't matter that it says Trooper - he fixes the VX one under this too).
    http://www.ebay.com/itm/110784352777...84.m1438.l2649
    Last edited by VX KAT : 10/25/2013 at 09:11 AM
    VX KAT
    ....the adventure BEGINS ANEW! ...2015......
    Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.

  11. #11
    Member Since
    Nov 2002
    Location
    2001 Dragon #0467
    Posts
    195
    Thanked: 0
    Quote Originally Posted by swift16 View Post
    What are you guys paying for the replacement module? And where are you getting them? Thanks in advance.
    Hey Frank (swift16),
    I got mine here
    Mine was from a 2001 4x4 Trooper. Paid around $130. The part number was the exactly the same 8971621921.

    Frank, when are we going to do Cars & Coffee
    Gene
    Last edited by rickshaw : 07/17/2009 at 05:59 AM

Similar Threads

  1. isuzu axiom intake module question
    By djvx in forum Chit-Chat ...
    Replies: 2
    Last Post: 12/24/2010, 05:46 PM
  2. ABS Module
    By haggisgood in forum VX Troubleshooting...
    Replies: 10
    Last Post: 02/19/2009, 01:25 PM
  3. ABS module, how much??!
    By Joe Isuzu in forum VX Talk...
    Replies: 8
    Last Post: 10/02/2008, 07:42 AM
  4. ABS module
    By WiSDoM in forum VX Troubleshooting...
    Replies: 6
    Last Post: 09/01/2007, 02:26 PM
  5. TOD Module
    By WiSDoM in forum VX Talk...
    Replies: 8
    Last Post: 06/30/2006, 09:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails