Another wheel and tyre question...

[alterastro]

The LT265/75R16 will fit on a "non-lifted" VX.

Really??? These are the tyres that Crotch has and he says he needed the bigger springs and torsion bars cranked up. Looking at his pics I can't imaging they would fit without that lift, but am happy to be proved wrong! I have Hankook RT03's at 285/75 16's on my Pajero, so maybe I'll do this lift and see if they fit without too much rubbing

To make CROTCHROCKET really jealous, get the new KUMHO - Road Venture M/T KL-71. It is a radical looking M/T tire and is now available in the U.K.

I know them well. I have several friends with them and highly recommend them. The only thing putting me off of them is that they are directional.

Cheers

Nick

[Ldub]

Really??? These are the tyres that Crotch has and he says he needed the bigger springs and torsion bars cranked up. Looking at his pics I can't imaging they would fit without that lift, but am happy to be proved wrong! I have Hankook RT03's at 285/75 16's on my Pajero, so maybe I'll do this lift and see if they fit without too much rubbing.

In the past I've had 265/70x16" on stock wheels, no lift, very little trimming of the front cladding.

I currently have 285/75x16" mounted on my stock wheels, that fit with a lift & some trimming.
I use them as my winter tires & loan them to my wheelin' buddy Jim for Moab every year.
285's may be a little wide for a 7" wheel, but if properly inflated, they seem to wear OK.

[crotchrocket]

happy to help

Those alloys look awesome!! And if your looking for sand blasting.......just so happens its my dads business www.blask-cleaning.co.uk You can then get them powder coated. But your looking at around £80 a rim all in i think.

patric (the irish guy) uses 30mm spacers which would set your offset to +8mm which would be fine. (mine is 0 offset so yours would be 8mm into the arches not out)

this is a handy calculator to test rim widths and offsets http://www.bigcustomwheels.com/info_specs.jsp


If you are interested in the steel rims i will find the reciept as not sure where i got them but it was on the net. I got 8" rims which arent easy to find!! *edit* found it http://www.tyresdirectuk.co.uk/xcart/home.php?cat=257

i got my tyres here http://www.4x4tyres.com
i was looking at the budget end (as kept road tyres on standard rims) so it was a choice between:

recip trial M/T (look mean!!!)
Bronco Grizzly Claw, not so good on road apparently
Kumho MT KL71, more expensive but look better in pictures. not as good in reality
Insa Dakar Turbo's (the ones i got) they are a BFG M/T copy and i couldnt be happier, i cruise at 80 on motorway and get through mud perfectly!! Grip is fine in dry and wet on the road. They do 'hum' on the road but i like it

[don moore]

funny ..they say tyres ......hehe

[LittleBeast]

285 wide tires are perfectly fine on our stock rims, and look pretty dang good, lots of people have the Nittoe Terra Grapplers 285/60-18 on their stock 18's I am sure a 285 would work fine for you if you wanted. Mine came with 285's on the stock rim when I 1st bought it used in Jan 2005

[Knivx]

Really??? These are the tyres that Crotch has and he says he needed the bigger springs and torsion bars cranked up. Looking at his pics I can't imaging they would fit without that lift, but am happy to be proved wrong! I have Hankook RT03's at 285/75 16's on my Pajero, so maybe I'll do this lift and see if they fit without too much rubbing



I know them well. I have several friends with them and highly recommend them. The only thing putting me off of them is that they are directional.

Cheers

Nick

I run 265/75r16's and i'm only slightly lifted in the front by cranking the torsion bars a little and then i trimmed the front of the front wheelwells. I'm not on stock wheels but the Hummer H3 wheels i run are only 1/2 inch wider than the stock vx 16's and i believe very close to the same backspacing and offset and all that. I've never rubbed that i've noticed. I don't consider myself lifted really. Just leveled.