Torsion Bar

[SomeBeach]

Well, if he ever worked on a old VW, he would know about torsion bars. Anyway, you can do it yourself, just follow the bar back and you will see the adjuster. Wire brush all the crud off, give it a good soaking with liquid wrench, or blaster, or your perfered lub, (wd40 will evaporate) the day before, measure the gap you have between front tire and cladding, both sides, mark the adjuster bolt to keep count and go for it, then take it in for an alignment

I'm not much of a mechanic. I don't think I'd feel comfortable adjusting the torsion bar.

[rowhard]

I'm not much of a mechanic. I don't think I'd feel comfortable adjusting the torsion bar.

then take it to a alignment shop, tell them what you want and have then do it and your alignment too

[djvx]

dougie.do you have a rachet and a 27mm socket and a can of wd 40, a jack and a tape measure? Thats all you need. Use the search feature as this subject has been covered many times, and there are pics too.

[SomeBeach]

dougie.do you have a rachet and a 27mm socket and a can of wd 40, a jack and a tape measure? Thats all you need. Use the search feature as this subject has been covered many times, and there are pics too.

I have everything I need to do this. Maybe I'll give it a try next warm dry day. I'm new to this site and have so many questions. I really appreciate all the help.

[LittleBeast]

http://www.vehicross.info/forums/sho...ight=lift+wiki

http://vehicross.info/forums/showthr...ilstein+shocks