overhead lights walk through

[Moncha]

I copied this over to the How To's section So it won't get lost in the archives eventually. I put credit to you, pbkid, and will get to changing the database entry to reflect your name.

[pbkid]

awesome. thanks boss-man!

well, i suppose if its going in the how-to i'll finish the write up to include how to do the relay

[Moncha]

Cool send it to me or post it and I'll copy it over

[nfpgasmask]

I copied this over to the How To's section So it won't get lost in the archives eventually. I put credit to you, pbkid, and will get to changing the database entry to reflect your name.

Hey Moncha, so the How-To's section is working? Do you want me to transfer my How-To's into a thread so they can be put there as well?

Thanks - Bart

[Moncha]

Hey Moncha, so the How-To's section is working? Do you want me to transfer my How-To's into a thread so they can be put there as well?

Thanks - Bart

You bet! If you have an attachment, send to me and mark in your write up where it should go and I'll link to it. Remember that the articles are moderated so I can keep unwanted and off topic posts out. Let me know if/when you have something and I'll approve it.

[tom4bren]

pb,

Did you do anything to protect that wire bundle where it passed through sheet metal? You said you removed the grommet but didn't mention replacing it with anything.

[pbkid]

yea..i removed the grommet to make room for the large gauge wire i used...i used a THICK bead of silicone on the roof of the VX then screwed the spoiler back down, hoping that ill get a good seal...