Results 1 to 15 of 22

Thread: Brake Clunk

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2008
    Location
    2000, Ebony Black, #0570
    Posts
    48
    Thanked: 0
    no one has had a clunk upon releasing their brakes? I do NOT mean when the vehicle downshifts to 0% front...
    nothing seems to be damaging anything but it sure doesn't feel right

  2. #2
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0

    Exclamation You are NOT crazy...

    My '01 has the exact same symptom right now... has had it for about 3 months or more. Haven't had a chance to check into it yet. I've been following this thread, hoping someone would post something helpful.

    Guys... the clunk IS coming from the brake area. Can't explain it... if I could, I'd have it fixed by now... LOL.
    SilverBullet75
    Formerly: '01 Ebony VXSTLTH
    Now: '08 Saab 9-7x Aero 6.0L

  3. #3
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1
    Quote Originally Posted by haggisgood View Post
    no one has had a clunk upon releasing their brakes? I do NOT mean when the vehicle downshifts to 0% front...
    nothing seems to be damaging anything but it sure doesn't feel right
    Quote Originally Posted by SilverBullet75 View Post
    My '01 has the exact same symptom right now... has had it for about 3 months or more. Haven't had a chance to check into it yet. I've been following this thread, hoping someone would post something helpful.

    Guys... the clunk IS coming from the brake area. Can't explain it... if I could, I'd have it fixed by now... LOL.
    Mine does this too, & it looks & feel like a motor mount to me...
    (I hope I'm wrong)
    Another possibility that keeps gnawing at my brain, (or is that a zombie?) is the possibility of front axle "wrap" or twist.

    Take a look at how much your transfer case shifter moves when this happens.

    You now have two cents that used to belong to me...
    Last edited by Ldub : 02/25/2009 at 08:31 AM

  4. #4
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    Quote Originally Posted by Ldub View Post
    Another possibility that keeps gnawing at my brain, (or is that s zombie?) is the possibility of front axle "wrap" or twist.
    that would make sense.. if i brake hard where i would have that clunk on takeoff, i shift to neutral and can feel it release, sometimes feels like the entire vehicle drops 1/4-1/2 inch... sort of opposite of when you put it in drive or reverse and let off the brake before releasing the e-brake

    but greasing the driveshaft did significantly reduce that clunk for me

  5. #5
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0
    Along with greasing the driveshaft, do you recommend just going through and verifying the tightness of all bolts under the VX? Reason I ask:

    When I bought my first (silver '99) VX, it had a missing transmission mount bolt (according to Carmax, who found and fixed the problem). This was the first thought I had when I started trying to diagnose the problem... but with the baby, and working from home, I really haven't been driving much lately and it's become a back-burner issue.

  6. #6
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1
    Quote Originally Posted by SilverBullet75 View Post
    Along with greasing the driveshaft, do you recommend just going through and verifying the tightness of all bolts under the VX?
    That'd be a good idea on ANY vehicle nearing ten years old...

    After reading a post on this subject by Joe Black, I removed my transmission mount to be sure it wasn't the cause...it wasn't, as it was with Joe's.
    Not being able to leave well enough alone, I through bolted the mount with some grade 8 hardware...





    This had no effect on the clunk...
    Last edited by Ldub : 01/19/2010 at 12:01 AM

  7. #7
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0

    Talking Issues fixed!!!

    Ok,

    Issues:

    1: A banging sound when I hit a bump...
    - thought was bad shocks... almost bought new set!
    2: Clunk when releasing brakes at stop lights.
    - thought was motor mounts, after checking trans mount.

    So, I went to the shop to get the banging sound looked at. Found to be my exhaust pipe hitting the crossmember/trans mount bar!
    The shop that installed the Vortec Muffler did not install any muffler hanger/mounts! The only did the one at the tail pipe!
    While the VX was on the lift, I asked them to give me an estimate on the motor mounts... they looked at me and asked... Why??
    They showed me that the mounts were fine, and explained that all the symptoms I had could easily be caused by the exhaust not being properly hung. I was a little skeptical, and told them I'd try it and let them know...

    SURE ENOUGH! No more clunk in the brakes! No more exhaust clunk! VX is happy again!!!

    So, to those with the "brake clunk", especially if you have had your stock muffler replaced... check your exhaust mounts to see if they are THERE, and in good shape if they are!

    Yay! Now I can go off-roading again! I haven't had this VX in the dirt YET (over a year) because of this issue. Didn't want to damage anything.

    Good luck!
    ---JIM---

Similar Threads

  1. EBC brake pads and Apex brake lines
    By Marlin in forum VX Modifications...
    Replies: 21
    Last Post: 12/14/2011, 02:15 PM
  2. Does yours clunk??
    By vx2001 in forum VX Talk...
    Replies: 7
    Last Post: 03/04/2011, 02:39 AM
  3. The clunk thing
    By MoonRaker in forum VX Troubleshooting...
    Replies: 25
    Last Post: 03/25/2009, 11:04 PM
  4. Clunk and Noise
    By ThunderChicken in forum VX Troubleshooting...
    Replies: 2
    Last Post: 07/28/2004, 09:38 PM
  5. Rear Clunk
    By VR4-Quest in forum VX Talk...
    Replies: 10
    Last Post: 05/04/2004, 11:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails