CV problems?

[nfpgasmask]

I am lifted with the OME912s in the rear and roughly 9-10 cranks of the T-bars up front. I would say my VX has a very slight rake. Knock on wood, but so far, my boots are holding up.

IMO, I think it is a result of badly dried out boots and too much lift. I think if you crank your front end up more than 10 cranks, you are going to increase the angle on your CVs exponentially with every turn, and the more lift, the worse the angle.

IMO, if you lift, your CV boots tearing is something you have to be mentally and financially ready to take care of when/if it happens, but the lift is well worth it. Once you lift you will never go back. It just feels "right" to have the VX up a little higher with bigger rubber.

Bart

[Ldub]

I am lifted with the OME912s in the rear and roughly 9-10 cranks of the T-bars up front. I would say my VX has a very slight rake. Knock on wood, but so far, my boots are holding up.

IMO, I think it is a result of badly dried out boots and too much lift. I think if you crank your front end up more than 10 cranks, you are going to increase the angle on your CVs exponentially with every turn, and the more lift, the worse the angle.

IMO, if you lift, your CV boots tearing is something you have to be mentally and financially ready to take care of when/if it happens, but the lift is well worth it. Once you lift you will never go back. It just feels "right" to have the VX up a little higher with bigger rubber.

Bart

Yep...after lifting with 912's & a one inch spring spacer in the rear, & about a dozen rotations on the T-bar adjusters, my stock boots lasted about 1-1/2 years before tearing.
I had anticipated & accepted the fact that they would eventually go TU, & had a set of mec-a-tecs from www.independent4x.com at the ready.

Using Billys handy write up, I was able to do it myself & $ave BIG money!

[CrnCnn]

Yep...after lifting with 912's & a one inch spring spacer in the rear, & about a dozen rotations on the T-bar adjusters, my stock boots lasted about 1-1/2 years before tearing.
I had anticipated & accepted the fact that they would eventually go TU, & had a set of mec-a-tecs from www.independent4x.com at the ready.

Using Billys handy write up, I was able to do it myself & $ave BIG money!

That sounded like a commercial uncle dub...

[Ldub]

That sounded like a commercial uncle dub...

LOL...nope, just my experience on that topic put in print...

However, I DO believe it's just plain smart to do business with companies that support the brand we drive, by providing us with development of product we're interested in buying...

That's also why I believe it's a good idea to support a site that has the potential to $ave you hundred$, if not thou$and$ of dollars in repairs...

Ask yourself (no, not you personally CrnCnn), where you would go for the kind of info, advice & good humor you find around here, if VXinfo were no longer in existence?

Now THAT sounded like a commercial...

[nfpgasmask]

Now THAT sounded like a commercial...

Yeah, but not as good as this:

"You'll say WOW everytime with SHAMWOW!"

Bart

[crotchrocket]

Yep...after lifting with 912's & a one inch spring spacer in the rear, & about a dozen rotations on the T-bar adjusters, my stock boots lasted about 1-1/2 years before tearing.
I had anticipated & accepted the fact that they would eventually go TU, & had a set of mec-a-tecs from www.independent4x.com at the ready.

Using Billys handy write up, I was able to do it myself & $ave BIG money!

Where abouts is the link for changing the boots? Do you have one?

[tom4bren]

The how2 on replacing the CV boots is in ... wait for it ... the how2 section. It's Billy's write up but I converted it to pdf so that you can print a copy to have handy during the install.

There's also a write up on installing diff drop brackets there too. This one was written by StarChild from an Isuzu forum but I converted that one to pdf as well.

Both are jobs that you can do in your driveway if you are willing to spend a full day at it and don't mind getting really dirty.

My lift was done by the PO. I'm pretty sure it's a full 3" in front. It put my CVs at such a harsh angle that the half shaft was almost touching the outer race. It's no suprise that the CV boots can't handle that bad of an angle. I was killing CV boots about every 6 months till I dropped my differential 2". I haven't had any problems since.

[crotchrocket]

Great thanks, don't worry i'll be under the car getting dirty all weekend if i can......sitting under a car in Sussex is ALOT better than being in my office in London, lol