Knuckle thrust washer and lift

[Ldub]

The initial symptom was weird loud squeaking sound from metal parts that happens time to time. But the initial destruction might happened because of broken down needle bearing.

This time it was something different with the same symptoms, though washer wear out partially too. Looks like I need to replace or polish knuckle and replace CV and that might resolve issue with the washer.

Thanks!...I'll be listening, though if it's a high pitched squeaking, I will probably miss it...

[uncle_asa]

Thanks!...I'll be listening, though if it's a high pitched squeaking, I will probably miss it...

Mine was aloud, cannot miss it. Much noticeable than squeaking from the brakes.

[etlsport]

when did it squeak? the front end of my vx squeaks quite a bit and i cant figure out why.. it does it when i go over bumps at low speed.. and when i use too much force to scrub the front end while cleaning... one of these days im gonna replace the front shocks to see if that helps... greaseable swaybar bushings were greased.. no dice..

[uncle_asa]

when did it squeak? the front end of my vx squeaks quite a bit and i cant figure out why.. it does it when i go over bumps at low speed.. and when i use too much force to scrub the front end while cleaning... one of these days im gonna replace the front shocks to see if that helps... greaseable swaybar bushings were greased.. no dice..

For me it happened in very different situations, it was mostly notable when I was driving across the parking lots, but still not all the time and does not matter if I made turn or driving straight. But sometimes it was quite notable when driving on the highway.