Results 1 to 13 of 13

Thread: How to program an FOB

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Sep 2007
    Location
    1379
    Posts
    149
    Thanked: 0
    OK or this?

    there is a way to program it to your specific VX.. heres how...

    seperate key from FOB (youll need key in ignition and to be able to press the button from under the dash)

    turn the key to the "ON" position, go under dash on drivers side, the unit is a black box most of the way to the left under the dash (towards the drivers side door, on that box theres a tiny green button on the bottom of it, press the green button with a pen or something.. while you hold the green button down, press the lock/unlock button on your fob repeatedly until your vx responds (should be a chirp), release the green button and youre done, take the key out, step outside and enjoy being able to lock and unlock your doors from 5 ft away... if you want more range check this thread http://www.vehicross.info/modules.ph...ewarticle&id=8
    __________________

  2. #2
    Member Since
    Sep 2007
    Location
    1379
    Posts
    149
    Thanked: 0

    Post

    I have not done either yet.. I just got a set of used ones for $40. My last one looks more like a pile of dead plastic.. "it fell out of my pocket and got run over."
    If you say the second works then i will try it first " its a hell of a lot simpler".
    Thanks for the heads up!
    i could of been slamming doors all day long..

  3. #3
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

    Question

    Quote Originally Posted by Rene M View Post
    OK or this?

    there is a way to program it to your specific VX.. heres how...

    seperate key from FOB (youll need key in ignition and to be able to press the button from under the dash)

    turn the key to the "ON" position, go under dash on drivers side, the unit is a black box most of the way to the left under the dash (towards the drivers side door, on that box theres a tiny green button on the bottom of it, press the green button with a pen or something.. while you hold the green button down, press the lock/unlock button on your fob repeatedly until your vx responds (should be a chirp), release the green button and youre done, take the key out, step outside and enjoy being able to lock and unlock your doors from 5 ft away... if you want more range check this thread http://www.vehicross.info/modules.ph...ewarticle&id=8


    __________________
    Or this??? that's the exact same post I just directed you to...

  4. #4
    Member Since
    Sep 2007
    Location
    1379
    Posts
    149
    Thanked: 0
    And that sir, is why i wrote what i did beneath it.

    """ everyone pay no heed to the junk i wrote form the dumb alarm/ dealer guy...."""
    The correct way " at least on my 99 is as LDUB has listed!

    Put the key in.
    turn the key on.
    hold the green button.
    You will hear a beep and you are done!

    So simple but so very effective.. Thank you Ldub for saving my afternoon!
    Last edited by Rene M : 05/24/2008 at 05:03 PM Reason: Ldub is the man....

  5. #5
    Member Since
    Mar 2012
    Location
    sold
    Posts
    1,158
    Thanked: 0
    Quote Originally Posted by Rene M View Post
    And that sir, is why i wrote what i did beneath it.

    """ everyone pay no heed to the junk i wrote form the dumb alarm/ dealer guy...."""
    The correct way " at least on my 99 is as LDUB has listed!

    Put the key in.
    turn the key on.
    hold the green button.
    You will hear a beep and you are done!

    So simple but so very effective.. Thank you Ldub for saving my afternoon!
    does it matter if your doors are open/closed or if the doors are locked/unlocked when using this method?

  6. #6
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Quote Originally Posted by evillecutter View Post
    does it matter if your doors are open/closed or if the doors are locked/unlocked when using this method?
    No, I just programmed mine lst week, with driver door open, doors unlocked, worked fine.

    http://www.vehicross.info/forums/sho...81&postcount=7

    http://www.vehicross.info/forums/sho...ramming+remote
    VX KAT
    ....the adventure BEGINS ANEW! ...2015......
    Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.

  7. #7
    Member Since
    Mar 2012
    Location
    sold
    Posts
    1,158
    Thanked: 0
    Quote Originally Posted by VX KAT View Post
    No, I just programmed mine lst week, with driver door open, doors unlocked, worked fine.

    http://www.vehicross.info/forums/sho...81&postcount=7

    http://www.vehicross.info/forums/sho...ramming+remote
    thank you very much got it working

  8. #8
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Hey, I think I found something new.....

    I was looking thru a bunch of paperwork JAFO included in that stuff I bought last summer.

    Found a TSB on the remote key fob.
    I don't really see any "problem" that the TSB addressed, but rather clear instructions for programming several options. i.e. chirp on/off, automatic arming on/off, erasing codes and valet mode.

    I never knew it had any options.

    It also explains how my first 2 remotes got CLEARED last week.....I inadvertently did exactly what they list here....

    I did quick search here for this TSB, but only found one concerning issues with a remote start device. I'm sure Mark's master list of TSBs has this.

Similar Threads

  1. OT: Radio Program about an accident
    By johnnyapollo in forum VX Talk...
    Replies: 2
    Last Post: 11/22/2005, 10:40 AM
  2. Anyone still have the PC Program?
    By VXMAN in forum VX Talk...
    Replies: 2
    Last Post: 11/02/2004, 01:08 PM
  3. VX 12-Step Program
    By Bill Brown in forum VX Talk...
    Replies: 20
    Last Post: 04/20/2004, 05:57 PM
  4. Alarm Program Shift
    By Simon Templar in forum VX Modifications...
    Replies: 7
    Last Post: 10/24/2003, 01:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails