Printable View
I painted my cladding today with flexible bumper paint.
I didn't like the faded plastic look.
While I had the bolts out I sprayed them silver. (not sure if I like them silver)
Last week I painted the calipers and debadged.
http://www.markalexandermiller.com/V...ss_Black_a.jpg
http://www.markalexandermiller.com/VehicrossBlack.jpg
Here is the Before:
http://www.markalexandermiller.com/VehicrossBefore.jpg
Ooooo, I likey! :heart: :cool!: :heart:
Looks very nice, The Cladding bolts look good also. :thumbup:
Wow, looks great!
I assume you took all cladding off before you painted, did't you?
How much did it cost to you?
very nice.............quick how-to right up? Which specific paint?
wow.. looks very nice.. please share the details!
Thanks :bwgy:
I guess I can do a little right up on how I did it.
It took a couple of hours with a friend and it was done in my back yard.
The cost very cheap everything available at Wal-Mart.
$37.76 Total Spent Before Tax
$23.22 For 6 Spray Cans Dupli-Color Bumper Coating
$ 4.74 For 1 Quart Klean Strip Prep-All Wax & Grease Remover
$ 6.77 For Masking Tape Blue 2inch I had a roll of ¾” that was free.
$ 2.63 For A Plastic Drop Cloth
http://www.markalexandermiller.com/PaintingSupplies.jpg
Tools used were a screw gun with a Philips bit, a T-30 bit, and an alan bit (size?)
The T-30 for the cladding, the alan for the fuel door, the Philips for the lights.
Remove the front turn lights, rear taillights, gas cap door assembly.
(you might want to tape off the gas door there are some nuts that will fall out)
The round front parking lamps, rear round reflectors, and headlights were taped off.
Remove the cladding bolts around the top of the cladding and in the door sills.
Remove car tag/plates.
Use a Scotch Brite pad and rub down the cladding (I didn't do this but you might want to)
Clean the cladding using the Prep All Wax and Grease Remover.
Tape off around the top of the cladding.
Using two layers of tape so it tapes off about 3.5 inches up from the cladding.
Some places you can slide the tape behind the cladding.
I even taped off the door handles and the half moon on the back door and painted them.
I removed the aluminum fangs from the front grill. Painted the grill also.
I used the drop cloth to lay over the wheels and tires.
Paint the cladding; I did two coats, first a light mist then a second thick coat. You can do a third mist also.
For the heck of it I sprayed the cladding bolts with Silver BBQ paint.
Removed the tape, be careful it can fall and stick to new painted area.
Put everything back on and you’re done.
http://www.markalexandermiller.com/P...gSupplies2.jpg
It is possible that I might have omitted something, I’m sleepy.
I did this same thing on my Jeep Wrangler a couple of years ago and it held up very well.
Looks good :)
Can you please make a follow up post in a few months so we can see how well this holds up to the elements and every day use.
very nice! :) Is there any problem with texture variations?
Looks "good"?! I think it looks GREAT!!!
Well, in the pictures, anyway - I almost can't believe a rattlecan job like that would look as good in person. I'm not doubting - I'm just expressing my shock at how sharp it looks!
And please keep the bolts as they are - that contrast was the first thing I noticed and I was stunned by the look! It's a sharp counterpoint to the black, with a classy look, and it ties the remaining chrome bits together visually.
WELL DONE!!!
Looks great! Good job!
Nice keep us posted on how it holds up... do you need to treat it with any cladding products or is it good to go and will not fade or streak?
One thing looks like you missed two bolts on the font by the grill.
Good work.
-Dave
Looks fantastic! Thanks for the write up.
Peace.
Tom
P.S.
Did you have some minor nicks and scrapes to cover up? Did it cover them up completely or is it still noticeable?
I'm impressed....I love the 100% black out look...now all you need to do is debadge and order up some clear corners...
Bart
That's it!! To hell with the paint booth-I'm closing it down and selling it. I like the contrasting bolts