some help here. i have a 98 model VCross and all is ok when my 4wd lever is on TOD or L4wd. but when i put it on 2wd after 5 mins of driving the check indicator light starts flashing. when i put it back to TOD it goes off. any ideas anybody.
Printable View
some help here. i have a 98 model VCross and all is ok when my 4wd lever is on TOD or L4wd. but when i put it on 2wd after 5 mins of driving the check indicator light starts flashing. when i put it back to TOD it goes off. any ideas anybody.
Hi Anit !Quote:
Originally Posted by anit
Did you feel any difference in the way the VX is performing when you go 2WD ?
Check all T-case connectors & wiring.
Also make sure all tires are properly inflated
X2 what Gussie said: make sure all of your tires are properly inflated. Sounds silly but it really can mess things up.
The best thing to do is check to see what the fault indicator light is indicating. I hope this info appies to your model VX with the push button TOD.
http://www.drivehq.com/file/df.aspx/...ystemcheck.gif
Numbers 4 and 5 are the GND terminals.
http://www.drivehq.com/file/df.aspx/...imgs/tod_1.gif
http://www.drivehq.com/file/df.aspx/...imgs/tod_2.gif
http://www.drivehq.com/file/df.aspx/.../imgs/abs5.gif
This is a wire that you use to jump the terminals at the data port-
http://www.drivehq.com/file/df.aspx/...pa/imgs/66.jpg
Here's a video I made showing the TOD check light flashing the code.
The code is 12 of course, meaning everything is normal.
5 seconds, 439 kb, wmv file-
http://www.drivehq.com/file/df.aspx/publish/mgpa/vids/tod.wmv
5 seconds, 5.9 mb, mpg file-
http://www.drivehq.com/file/df.aspx/publish/mgpa/vids/tod.mpg
I hope this was helpful to you.
Mark Griffin