PDA

View Full Version : amp install



MZ-N10
05/25/2006, 07:29 PM
i know there were alot of threads regarding people installin amps under the driver seat, but i just got my new 4 channel, Lightning audio(i know is sh*tty but it was cheap) and its maybe 1/8-1/4" too high to clear the rear metal part of teh seat. any ideas on how to lower the amp alittle?

Ldub
05/25/2006, 07:32 PM
:smack: :smack: :smack: :smack: :smack:





:laughing:

Tone
05/25/2006, 07:42 PM
Remove the foam under the carpet if you haven't already, cut a bit off of the metal that hangs down off the seat or use longer seat mount bolts with spacers. You'll likely have the same issue on the passenger side as well although I was able to put an amp and a flip out screen brain on that side on top of the TOD computer. Good luck.

Ruflyf
05/26/2006, 05:22 AM
or you could mount it behind the rear panels by the back door....lots of room behind the jack kit