VXer
From the previous posts that I read, I came to that same conclusion. I have a head until and cd changer that I took out of a previous vehicle and I think it may be going into the VX soon. I am hoping that I can hook up and additional input for my iPod as well. Thanks for confirming what I had found from the site.Originally Posted by VX KAT
Mike
VXer
The original radio is out and I have put in a JVC head unit that I had. I also have a 6 disk changer for the head unit. A very simple conversion, I got a harness that would plug into the VX and connected it to the JVC harness. It was plug and play from there. I was hoping that the changer would fit where the original was but the JVC changer is much bigger, so I am trying to determine the best place to put it. I thought about under one of the seats but it is too tall. I am thinking about putting it under the "tool holder". I haven't even done any measuring to see if it will fit but if need be I used to do fiberglass repair so I could fabricate a box for it to fit in. I also swapped a mirror out of an Axiom with auto-dim and Homelink but I have not had the time to get it working yet.
Super VXer
Seat sliders may lift the seat enough to make it fit if that is your preference.
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
VXer
That's good thought, Tom but as it is my head is nearly to the headliner(very tall from the waist up). I was looking at pictures in the gallery to see if I could get any ideas and saw a photo of the "tool storage" area with out the trim. I quickly realized that I can not cut into that are below because that is the wheel well. I will have to keep thinking about it for awhile. I will come up with something or just blow it off and get an iPod adapter and go that direction.
Posting Permissions
Reply With Quote