For those with Superchargers

[Ldub]

WTH is that I see??????

Rotate it 1/4 turn clockwise in your mind...you'll be OK then...

[don moore]

i try it and all the stuff on my monitor ..I still have a old type of monitor ..not the fancy schmancy one you have ..the stuff started to fall off the top.. so i had to turn my head instead..now I have a sore neck.........is this a part in my VX??

[Jolly Roger VX'er]

i try it and all the stuff on my monitor ..I still have a old type of monitor ..not the fancy schmancy one you have ..the stuff started to fall off the top.. so i had to turn my head instead..now I have a sore neck.........is this a part in my VX??

I think I can be of help here (gotta stop laughing first though ).

This is a thread 'bout Superchargers and the pic Dub'ster posted is where to plumb (connect) your vacuum line so that your boost gauge reads correctly.

so..no..you are not gonna see this on your engine 'cause if I'm not mistakin, you do not have a supercharger on that mean 'o' VX of yours.

Hope this helps...

doubtful it'll help with your stiff neck.... might need to seek out a masseuse for that......not a moose...a masseuse....or massage therapist.

Hope that helps...

[Ldub]

i try it and all the stuff on my monitor ..I still have a old type of monitor ..not the fancy schmancy one you have ..the stuff started to fall off the top.. so i had to turn my head instead..now I have a sore neck.........is this a part in my VX??

LOL...I said "in your MIND"...

I think I can be of help here (gotta stop laughing first though ).

This is a thread 'bout Superchargers and the pic Dub'ster posted is where to plumb (connect) your vacuum line so that your boost gauge reads correctly.

so..no..you are not gonna see this on your engine 'cause if I'm not mistakin, you do not have a supercharger on that mean 'o' VX of yours.

Hope this helps...

doubtful it'll help with your stiff neck.... might need to seek out a masseuse for that......not a moose...a masseuse....or massage therapist.

Hope that helps...

Like Steve...I mean Greg (s-s-snicker...) said, it is indeed a closeup of the south end of the S/C assembly...

[don moore]

fine ..mess me up with something I dont have on my VX...grrrr...

[WormGod]

I never put a boost control gauge in my VX so I couldn't tell ya. You SHOULD be managing 5psi though (given you have that pully). I highly doubt elevation is affecting you there in TX so that shouldn't be the issue.

Curious, what gauges are you all using? Mech/needle assembly or digital? My STi has a huge boost control gauge on my dash (OEM) that stares me in the face so I figure having one in the VX might not be such a big annoyance.

[Ldub]

I wish I knew as Tone hooked it up for me. I can't ask him now because he's in heaven looking down upon us.

Where's yours hooked into?

I just checked with my own eyeballs & it is indeed T'd off of the FPR vacuum line...

I never put a boost control gauge in my VX so I couldn't tell ya. You SHOULD be managing 5psi though (given you have that pully). I highly doubt elevation is affecting you there in TX so that shouldn't be the issue.

Curious, what gauges are you all using? Mech/needle assembly or digital? My STi has a huge boost control gauge on my dash (OEM) that stares me in the face so I figure having one in the VX might not be such a big annoyance.

I use one of these, in a generic, heat gun & scissor modified A-pillar pod...

[Jolly Roger VX'er]

like Steve...I mean Greg (s-s-snicker...) said,

My session with my shrink today brought me close to resolving my issues! He had me use peotos.......I mean photos instead of ink blots; a photo = 1,000 rubles..I mean words




okay...so a few words anywaze to clarify..from da pigment of my imagination...that's me Steve/Greg (double-combo happy meal in fast food terms) on the rite and my anemone on the left. I'm gonna redraw dis so dat da guy(s) on da rite has all da wepons..............yeah baby!

did ya know Chekov wasn't on the first season of Trek Wars?

anyways...my shrink says after a few more drawings I can be all better


I'm working on finishing dis one up:




c'ya later when I'm all betta!

[ScottinMA]

My session with my shrink today brought me close to resolving my issues! He had me use peotos.......I mean photos instead of ink blots; a photo = 1,000 rubles..I mean words

? too much ETOH?

[Ldub]

My session with my shrink today brought me close to resolving my issues! He had me use peotos.......I mean photos instead of ink blots; a photo = 1,000 rubles..I mean words




okay...so a few words anywaze to clarify..from da pigment of my imagination...that's me Steve/Greg (double-combo happy meal in fast food terms) on the rite and my anemone on the left. I'm gonna redraw dis so dat da guy(s) on da rite has all da wepons..............yeah baby!

did ya know Chekov wasn't on the first season of Trek Wars?

anyways...my shrink says after a few more drawings I can be all better


I'm working on finishing dis one up:




c'ya later when I'm all betta!

LOL...I'm quite sure you'll be fine...eventually...

As I hope we all will...eventually...

[Gussie2000]

Rotate it 1/4 turn clockwise in your mind...you'll be OK then...

Haha LDUB you did it again...

Julian if that don't work for you then turn the monitor 1/4 clockwise hahaha