Looks Great................
Looks Great................
Very sharp...
Hood scoop looks OUTSTANDING! I'll bet you could sell a couple of those here, doncha know. Very tastefully done - subtle but "assertive"...
Thank You...
This is how we did the hood scoop.
Lucky me, we had a trashed Thunderbird hood at my work.
On the VX I laid paper over the entire hood and taped down the edges.
Then I cut out where the insert would be,
and threw away the center of the paper that was the insert.
Then I untapped the template, then made some center points on the thunderbird. Taped the template on the thunderbird hood, marked the lines to be cut, Then using a sawzall I cut out the template lines leaving about an inch of play all away around. The new scoop was lifted and separated from the original hood, so now it is a small thin hood.(thunder bird hood has a top and bottom layer sandwiched together) We then used an orbital sander around the edges until it fit. It sands quick. The VX hood was cut where the Thunderbird scoop needed to be recessed. Then we lifted the hood with the new insert in place and marked the hood for the location of the new bolts that use the stock nuts. We used some kick butt two part epoxy to mount the bolts. Sand, primer, fake carbon dip, clear coat. Done.
The Headlights:
My headlights looked hazed all the time, like someone smeared mud on them.
I sanded them with 800 and then 1200.
Sprayed them with 3m plastic primer.
Then two heavy coats of two part automotive clear coat.
Wow, this did very good!
They don't need to be removed to fix, but I was installing driving lights.
![]()
Last edited by Spyder : 02/08/2009 at 08:08 PM Reason: added more pics and info :)
Spyder aka Mark Miller
Spyder, that is very sweet, espically the hood scoop
Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.
THE best hood scoop I have seen on a VX!
What DVD player is that?
Billy Oliver
15xIronman
My Sponsors:
Accelerate3Coaching
TriSports.com (PM me for 1 time use 20% off code)
ya that looks amazing... very very clean looking....the carbon fiber dip is SICK....how does that work???
"Do Not Seek Praise. Seek Criticism."
"If You Can't Solve A Problem, It's Because You're Playing By The Rules."
"The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."
-Paul Arden
An actual, functional hood scoop.... I am very impressed and it looks great.
Su-Weeeet!!!
Wow, too bad you didn't work for Isuzu back in the 90's. That is the hood insert the VX Should have came with.
Nice Job! :_drool:
OEM roof rack, Thule Xpedition 696 rack, Rancho RS9000 shocks, OME 913 coil springs, 3" lift, American Racing Teflon Chambers wheels, Yokohama Geolandar HT/S G051 tires (275/70/16), Energy Suspension greaseable bushings, steel-braided Kevlar-reinforced brake lines, WeatherTech wind deflectors, Malibu 18w driving lights, Plasma SuperWhite 100w headlights, NGK Iridium plugs, K&N drop-in air filter, Optima Red Top, Psychos2 rear-door subwoofer enclosure w/CDT Audio 10" sub, Blaupunkt subwoofer amp, iPod Video 80GB, Kenwood KVT-617 DVD head unit w/7" motorized touch-screen, Kenwood GPS HD navigation module, Kenwood iPod adapter, Kenwood back-up camera, Sirius radio, Flowmaster Extreme Off-Road muffler (black diamond-plate steel) w/ carbon fiber tip, Ford Taurus OEM cup-holder/coin tray (single-DIN/lower bay), personalized license plate "ORBITAL", 3M window tint, debadged, removed rear seat, custom 'radiation symbol' side magnetic signs, VX Concepts front skid plate