Wheel Spec Info, Hard to find a one stop shop.

[Gussie2000]

Thanks for the help, and thanks for the Diagram LDub, it is confusing, but I'm grasping it.

As for the 108mm centerbore, I'm guessing that came up because that's what most aftermarket wheels have (when they have a large center bore) I haven't seen anything with a 100, they're all 108. I believe that's what the H3 requires.

Tom4Bren, I do have a question about your spare tire... Does the rear door feel like it can handle the weight of that when it's open? I'm considering putting my fullsize spare back there like you, but I worry about the weight on the door.

I called the tirerack customer service about the center bore issue & they told me that the 108mm is the standart for most 6x5.5 wheels.

[LittleBeast]

I called the tirerack customer service about the center bore issue & they told me that the 108mm is the standart for most 6x5.5 wheels.

Yeah just make sure it is more than 100mm and you will be fine. I just ran into a problem because my lug pattern and center bore were drilled per my specs and the 108mm bore was so big that it is harder than normal for me to line up the lugs when reinstalling wheels, but I am guessing there is less wiggle room to work with if you get the 100mm bore, just seems like I have too much wiggle room to work with.

[IndianaVX]

for what its worth, i just bought a set of 98 rodeo wheels, and they fit fine.