Jeep ax15 bellhousing on Isuzu ar5?

I'm wanting to convert my Isuzu to a VW TDI. There are no adapters available to mate the GM 60 degree v6 (Isuzu 3.2/3.5) to the TDI, but there are adapters for the Jeep 4.0l. Since the Isuzu ar5 is the same basic transmission as the Jeep ax15, can I swap the bellhousing and just use the Jeep pressure plate with an Isuzu clutch disk or do I need to change the ar5 input shaft to the Jeep part? I understand that I will need to take the slave cylinder into consideration, but I'm wanting verification that my idea for the bellhousing is workable.