A week or so ago my blower motor just stopped working. After doing some research I found it is likely the resistor pack, blower motor, or relay. I'm trying to narrow down the possibilities as I don't want to just start replacing parts until something fixes it.

What I've done so far,

1) removed blower motor and put my meter on the wires, no power on any leads with ign in ON position and fan switch on.

2) lowered glove box and removed resistor pack plug. no power to any of the leads on the plug either.

3) switched relay E25 with E27 under the hood. This did not give me power to any lead either.

Any ideas on what to try next I would think something would have power to it when the fan switch on the dash is turned on, right?


Thanks

Keith