Results 1 to 15 of 100

Thread: Mods for robotic VX

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    Welcome and good luck! Bob Land Racing did Laughlin and a number of other notable offroad events - not sure if his site is still around but you may wish to search the web or this site. Cyrk, you have the autographed picture with stats on it - see what he lists for tires.

    I'd think you'd most importantly want to use tires that competitors had used in Baja or Dakar or any of the other big events.

  2. #2
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    I'm not positive on what the conditions of the desert are but if it's deep sand the Mickey Thompson Baja belted tires did well here. I would not do a standard MT style tire (Like BFG MT) in the sand as it will dig in too much. You would want the widest tires possible too to keep you floating on top of the sand. For me the 31x11.5 Mickey T. Baja belted did very well in glacier silt and deep sand. No lift required just a little bit of trimming up front of the front wheel wells. The Baja Claws mounted backwards might do real well too.

    But if a MT tire will work I can't believe how well my TrXus MT's do in all the conditions I have put them through. Not sure if they make ones that will fit, but most likely they do.

    All the above tires give a descent ride.
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  3. #3
    Member Since
    May 2004
    Location
    Used to own #777
    Posts
    208
    Thanked: 0
    Personally, I'd find a hard-ish compound all-terrain (AT) tire, or get some kind of run-flat insert to put in an AT tire. (maybe have new centers welded into H1 runflat rims) There's obviously no way to change a flat out there. If I was running normal AT tires at 20-30mph I'm not sure that I'd want less than 20psi, probably around 25-30psi. You risk popping them the higher the PSI, but you risk rolling it off of the bead at lower pressures.

    I have a few pics of Bob Land's VX, and the tires that he used. They were not off-the-shelf tires. Bob told us that he had them custom cut, and were a very hard rubber compound. The ones on the VX in the pics below have a race on them, and I had a hard time telling them from the brand new ones in his shop.

    http://tad.grosvenor.org/gallery/MoabMay2001/a22_19A

    You can see the size here: (7.50 R 16 it looks like to me)
    http://tad.grosvenor.org/gallery/MoabMay2001/a24_21A

    Here's the tread that he ran on his Amigo:
    http://tad.grosvenor.org/gallery/MoabMay2001/a21_18A

    Keep us up to date. This company has an entry as well:
    http://www.mitre.org/news/digest/adv...hallenge1.html

    A group from Florida entered a 1993 Trooper last year.
    http://cimar.mae.ufl.edu/teamcimar/g...2004/index.htm

    -Tad
    Last edited by Nazrat : 11/15/2007 at 03:24 PM

  4. #4
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    I saw this and the other post inthe intro forum.. First, WELCOME!! The project sounds very cool. I even watched the last one when it was presented to TechTV.
    If you would like, I can made a specific forum to keep all of your updates and questions in one place so it doesn't get spread out. Let me know.
    Scott / moncha.com

  5. #5
    Member Since
    Mar 2005
    Location
    1999 White Ironman 1348
    Posts
    39
    Thanked: 0
    Quote Originally Posted by Moncha
    If you would like, I can made a specific forum to keep all of your updates and questions in one place so it doesn't get spread out. Let me know.
    That sounds like a good idea. Thank you!

  6. #6
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    There ya go!

  7. #7
    Member Since
    Jul 2002
    Location
    99 Silver
    Posts
    201
    Thanked: 0
    No advice except....GOOD LUCK!....because as far as I know, no robot has completed the trip (have they??) if not that would be really cool for the VX robot to make history. not to mention the fame would increase it's popularity and there by increase it's value. Good luck indeed. Please don't forget to post pics of that ...Desert-Storm Trooper.
    Last edited by StormTROOPER : 03/02/2005 at 01:48 AM
    It's the love child of a Hummer & SLK, uniquely rugged & SLeeK

  8. #8
    Member Since
    Aug 2003
    Location
    1999,Silver,Vehicross,0928
    Posts
    1,087
    Thanked: 0
    gl.....keep us posted on how it turns out
    ________
    LoveMirage live
    Last edited by MZ-N10 : 09/05/2011 at 03:59 PM

Similar Threads

  1. mods mods mods on the mind.
    By ABDragonVX in forum VX Modifications...
    Replies: 34
    Last Post: 03/09/2013, 08:51 PM
  2. Robotic VX to compete again!
    By Art in forum Austin Robot Technology
    Replies: 32
    Last Post: 08/27/2010, 02:47 PM
  3. DARPA Robotic VX...its no longer an urban myth!!!!
    By Triathlete in forum VX Talk...
    Replies: 15
    Last Post: 10/12/2005, 08:29 AM
  4. Dinner w/the robotic VX team in Tucson 9/23/05
    By Triathlete in forum Meets...
    Replies: 2
    Last Post: 09/23/2005, 01:21 PM
  5. Skid plates for robotic VX
    By Art in forum Austin Robot Technology
    Replies: 10
    Last Post: 03/10/2005, 05:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails