Moncha did a write up a long time ago (can't seem to find it right now) on how to install some Hella Micro DE lights in the round running light holes. I used that write up and some personal "engineering" to install a set of Xenon projector beam lights with angel eye rings on them. Here is a picture of Vicki with the old angel eye lights in place (I have since replaced these with the projector beams): http://www.vehicross.info/gallery/sh...yes-08&cat=500 http://www.vehicross.info/gallery/sh...eyes-1&cat=500
Basically ended up fabbing a mount to hold the light at the proper height and mounted that to the top of the turn signal recess. It is very thick plastic and it's pretty stable even on Moab trail runs.
I may have some pictures of my install lying around that I'd be happy to post if you think they would help.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless