appreciate the info etlsport, now I need to find a friend who has a soldering kit
appreciate the info etlsport, now I need to find a friend who has a soldering kit
you can get them crazy cheap.. i bought a nice butane powered one that also works as a torch and hot knife and heat blower from home depot for $35 i think.. radio shack you can probably get an electric one and some solder for under 15 bucks
ok, I'm just thinking for the few times I'll need one I will probably just see if I can get someone to help here, thanks again Etlsport,
now I want to make certain I'm understanding your first response correctly, you're saying soldering the wires from the new speaker to the adaptor I can find at an indy auto supply store, am I right?
yepyep.. this is what i used...
http://www.crutchfield.com/S-FkqdJKG...100&I=12071003
the ones i got didnt have the spade connectors on the other end, but i stripped the wire about 1", fed it through the small hole in the speaker connections, wrapped the wire around it as much as i could, then soldered over all of it
cool! thanks for the help!