I got new pins for both front and back at NAPA. They even listed it for the VX.

As for the bracket, I got the broken part (I'm guessing the pin broke off on you) out by heating the outside of the pin area red-hot then slamming the face where the head of the pin would be against my vice. It wiggled out slowly until I could grab it with pliers.

Worth a try anyways. Sometimes drilling out carefully with a drill bit smaller than the pin by 1/16" or so will release some of the tension and generally shake things loose enough you can get it out. You can always run a tap into the hollowed pin so you can use a bolt to pull it.