Quote Originally Posted by Kenny
The gauges come with a little push button to turn on the indiglo, but I plan to wire this switch into the cluster bulb power so they turn on when I turn on the cluster lights.

You might be able to put a variable resistor on the power side to dim the indiglo. Or try to wire the power to the cluster bulbs and see if dimming them will dim the indiglo... Personally, I like the big blue glow.

Just PM me if you need some specific help. You can also upload a photo and I could mark it up to show any info you're looking for...

Good Luck!
Kenny, if you just try wiring around that on/off switch it will not work I have tried and others have tried and I called the company it is not possible without purchasing a seperate box (which has a knob on it unlike the power box that comes with the kit originally now earlier kits came with this upgraded box but no more) that makes it possible to dim them and change to a green color. Box is around $10 if I am remembering, it was a while ago. But if you just wire up the power wire (red wire going to black box) to the Green Wire with the red stripe (illumination wire) then you will get a lot of dimming ability, but if you dim too low the gauge will cut off and you will have to push the on/off button again.
djkymar this is really easy to do as long as you don't mind remembering that you are looking at temp instead of oil above the gas, no cutting easy! But REMEMBER TO LEAVE original face plates behind all gauges or you will get a lot of shining around the edges you do not want.... Hope that helps. Dimming is very easily attained though, just wire up to the Green w/red stripe.
In Christ,
Ryan H