Originally Posted by iamjacksadrenalgland
What I did was bought a small breather from autozone ($10) and got a piece of rubber hose the right diameter and a couple hose clamps. I used the hose to connect the breather to the pcv valve and install the stock clamps to make sure it does not fall off. Take the hose that is connected to the intake plenum and plug it , I used a bolt that was the right diameter and used the hose clamps on both ends of the hose. It is very important that this hose is plugged or you will have an air leak.The breather is actually hidden under the plastic cover. I did not actually remove the pcv valve, just made it so the oil cannot be sucked into the intake. The reason this happens is poor design of the valve cover. There is either no baffle or insuficient baffles to stop this from happening when the pcv valve sticks open. I will post a pic as soon as I can. shawn
Reply With Quote