Torsion bar

[Triathlete]

If you lift the front end a little with a jack to unload the t bars they shouldturn fairly easy with a good socket wrench. I had to use a breaker bar with mine. The adjusters are basically just big screws. They are under the vehicle, never turned and exposed to the elements, dirt, grime and whatever else comes up off the road...so they could be extected to be a little tough to turn.

[texasvx]

Thanks, I'll try that. I just didn't want to buy the springs and all and then not be able to get the front lifted....

[Ldub]

Even if the torsion bar were tweaked, you should be able to re-index it (under no load) in the adjuster for more lift.
However, IF it's tweaked, it may now have a different "rate" (strength) under load than the non-tweaked side.