wiped out seat and found g sensor voltage between outside wires 3 in total was 2.49 v when i unbolted g sensor from floor and tilted it to app 35 degries eg going up hill the voltage changed to 1.01v looks as if its working wot now ?
'Zoid
wiped out seat and found g sensor voltage between outside wires 3 in total was 2.49 v when i unbolted g sensor from floor and tilted it to app 35 degries eg going up hill the voltage changed to 1.01v looks as if its working wot now ?
Super VXer
As a vertical g-sensor it shouldn't react to being tilted. And if it was reading 2.49 while level and still then then you likely have a bad sensor. Double check your reading with the sensor fastened in place and not being disturbed.
If you go looking for a replacement keep in mind that it should be the same part from a Trooper or Rodeo in the same year range.
Over 20 years of Isuzu enjoyment...
'Zoid
bolted it back in g sensor,started engine reading 2.49v to the outside wires .brown wire to center wire reads 4.94v unbolted it again and shook it up and down gently voltage all over the place 1.7v-2.55v moved sensor to 45degrees down hill 3.8 volts and on a 30degree side hill dident move voltage much 1020pm at night will check scrapyards tomorow thanks
Posting Permissions
Reply With Quote