Results 1 to 15 of 22

Thread: Sludge under valve covers

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2004
    Location
    2000,kaiser,VX,0476
    Posts
    125
    Thanked: 1
    I bought the truck with 56000 miles and now it has 82500 miles, I assumed by now it would be cleaner then what I saw. Changed oil every 5000 miles. I was surprized to see that much sludge.
    OttoVx

  2. #2
    Member Since
    Jul 2006
    Location
    2000 IronMan #11
    Posts
    2,753
    Thanked: 0
    While on this subject and just a yes if possible will do. I would like to switch to Mobil full synthetic. Im running normal oil in there right now as far as i know. Not had the VX for more than a month. The question is could I just drain old oil and then put new oil in? Is there any other proceedures i need to do before transferring to the new oil?......5x30right? southern indiana climate...

  3. #3
    Member Since
    Dec 2002
    Location
    2001 Ebony 0177
    Posts
    2,120
    Thanked: 0
    10/30 is probably a better choice in an older engine. Just swap juice and filter like usual.

  4. #4
    Member Since
    Jul 2006
    Location
    2000 IronMan #11
    Posts
    2,753
    Thanked: 0
    its a 2000 with 40,000 miles so 10/30 mobil 1?

  5. #5
    Member Since
    Mar 2006
    Location
    2001 FOXFIRE 0579
    Posts
    887
    Thanked: 0
    jharris,
    i would tell you to do as joe mentioned, in your situation. after changing to full syn. change oiil, and filter again in 1000 to 1500 miles. this should "clean" the old oil outta there. im a hoosier also. started with the 10-30, but im running 5/30 now.
    take it easy
    david

  6. #6
    Member Since
    Mar 2006
    Location
    2001 FOXFIRE 0579
    Posts
    887
    Thanked: 0
    jharris,
    one more thing, i replace one quart of oil with a quart of lucas synthetic oil stabizer. so, 4 qts of oil, and 1qt of stabilizer. some people poo poo this product, but im a beliver in it.

  7. #7
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    Use a quart of engine oil flush avail at any autoparts store before you drain the oil - follow directions, do not drive with this in. I run a qt of diesel through before every other oil change as it is cheaper and accomplishes the same thing. You might want to do it every time you change your oil to clean away the excess. sludge.

Similar Threads

  1. EGR Valve
    By mattferguson14 in forum VX Talk...
    Replies: 26
    Last Post: 05/22/2015, 11:29 AM
  2. E.r.g. Valve
    By kehecross in forum VX Talk...
    Replies: 17
    Last Post: 08/05/2014, 08:21 AM
  3. where is PCV valve located, and how do i clean the valve tube?
    By CoastieCosta567 in forum General Tips...
    Replies: 3
    Last Post: 05/14/2007, 09:33 AM
  4. Egr Valve
    By coolk41 in forum VX Troubleshooting...
    Replies: 2
    Last Post: 10/10/2005, 06:09 AM
  5. Oil Drain Valve
    By Doc4h in forum VX Modifications...
    Replies: 15
    Last Post: 05/19/2005, 12:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails