I did this one a bit different than before.

I did pull the front nose cladding off, but not the rest.

I washed and
then used prep paint grease wax remover,
scuffed with scotch brite pads,
then again used the paint prep grease/wax remover,
then I used an aderhison promoter primmer (3 coats)
then about three coats of the bumper coating.
I'm letting it cure for about 3 days.

Painted the cladding bolts silver. Looks very cool.

I'm working on the inside too. I replaced them rear speakers and added a sub to the back. Just need to button inside back up.